System Settings and Others > System Settings > Customize > Laser

Using Laser Rangefinder

In this add-on, there are two ways to measure with laser rangefinder: using GPS position as datum and setting reference point as datum. With GPS position as datum, firstly GPS must be turned on to get the current GPS position, and then start to measure with laser rangefinder. The centroid information get is right the information of the spot where the laser rangefinder shoots. The other way is to take a reference point as datum, which is used when you are unable to reach the target. Through specifying a reference point and relative position, the information of the real target can be found through calculation.