Network Analysis Elements
After Service Area is chosen, the four related network analysis elements (Facility, Point barrier, line barrier and polygon barrier) will be revealed on Network Location Window in the left side. Now we are to introduce the network analysis elements and the parameters.
Facility
It saves the network positions of the facilities. This layer contains two different symbols: the located facility and unlocated facility. Users can change the color and style of the Facilities layer in Layers in the right side, or set the related parameters on Network Location Window in the left side.
Facility Parameters
Parameter |
Description |
|---|---|
Name |
The name of the facility. |
Position |
The coordinates of the facility. |
Range |
Sets the distance or time to search the service area from the facility. The cost type can be switched between Time or Distance (the unit is second or meter) from Analysis Settings > Cost Type. The default Range is 3000, if you cannot get the result, this might be no result was found in this default range. We suggest you to modify the Range to fit your demand. |
Point Barrier, Line Barrier, Polygon Barrier
It stops or changes the accessibility of network data. This layer contains two different symbols: the located point barrier, unlocated point barrier, line barrier and polygon barrier. Users can change the color and style of the Barriers layer in Layers in the right side, or set the related parameters on Network Location window in the left side.
Point Barrier Parameters
Parameter |
Description |
|---|---|
Name |
The name of the point barrier. |
Position |
The coordinates of the point barrier. |
Line Barrier Parameter
Parameter |
Description |
|---|---|
Name |
The name of the line barrier. |
Polygon Barrier Parameter
Parameter |
Description |
|---|---|
Name |
The name of the polygon barrier. |
※ Back to Run Service Area chapter.
©2016 Supergeo Technologies Inc. All rights reserved.